Rockwool Rocklap 1m Foil Backed Pipe Insulation Lagging-48mm-25mm-Wall
48mm Diameter 25mm Wall Rockwool Rocklap Foil Faced Mineral Wool Insulation 1 metre Length
Rockwool RockLap H&V Sections are pre-formed sections of stone wool insulation, manufactured pre-slit for ease of application and have a layer of factory applied foil facing and a self-adhesive lap. The self-adhesive lap allows the sections to be snapped onto the pipework, then backing tape used to completely seal the joint.
The sections have been designed to provide acoustic and thermal insulation to heating, ventilation and air conditioning pipework, from temperatures of 0 C to 250 C. The sections also have properties that allow them to insulate from frost damage.
RockLap H&V Sections are used for heating and ventilation pipes in a range of settings, through buildings, plants and other structures. The sections have been proven to deliver high-performance thermal insulation in a range of settings with varying climates and degrees of exposure for over 60 years.
Product Features and Benefits:
- Fast and simple to install with the snap system, reducing cost and the amount of time on site
- The requirement for taping is significantly reduced due to the security of the snap system, taping is simply used as a seal
- ROCKWOOL RockLap H&V Sections have limited combustibility; the surface finish is also compliant with Class 0
- The sections are resilient and high performing provided in a one-piece, with reinforced foil and integral lap
Product Name | Rockwool Rocklap 1m Foil Backed Pipe Insulation Lagging-48mm-25mm-Wall |
---|---|
SKU | R25X48 |
mpn | R25X48 |
Brand c2c | Rockwool |
Short Description |
|
Description | 48mm Diameter 25mm Wall Rockwool Rocklap Foil Faced Mineral Wool Insulation 1 metre LengthRockwool RockLap H&V Sections are pre-formed sections of stone wool insulation, manufactured pre-slit for ease of application and have a layer of factory applied foil facing and a self-adhesive lap. The self-adhesive lap allows the sections to be snapped onto the pipework, then backing tape used to completely seal the joint. The sections have been designed to provide acoustic and thermal insulation to heating, ventilation and air conditioning pipework, from temperatures of 0 C to 250 C. The sections also have properties that allow them to insulate from frost damage. RockLap H&V Sections are used for heating and ventilation pipes in a range of settings, through buildings, plants and other structures. The sections have been proven to deliver high-performance thermal insulation in a range of settings with varying climates and degrees of exposure for over 60 years. Product Features and Benefits:
|