UK’S NUMBER 1 COMPANY FOR INSULATION

INDUSTRY LEADING BRANDS

FREE UK MAINLAND DELIVERY ON ORDERS OVER £50*

* EXCL. VAT. SELECT AT CHECKOUT. EXCLUDES CERTAIN POSTCODES.

Armaflex Solar Steam High Temperature Pipe Insulation Tape 15m x 50mm x 3mm HT-TAPE Lagging

SKU
L145
£83.16 £69.30

Armaflex Solar Steam High-Temperature Pipe Insulation Tape 15m x 50mm x 3mm HT-TAPE Lagging

HT Armaflex High-Temperature Solar and Exterior Use Insulation.

HT/Armaflex is the insulation that meets the growing demand for a reliable and environmentally friendly flexible insulation material that can be used at higher temperatures.

Tape service temperature: Max +85 C 

The advantage of specifying HT/Armaflex.

  • Remains flexible at high temperatures of up to +150 C** and low temperatures down to -200 C*
  • UV-resistant and can be installed outside without additional protective measures.
  • Class 1 resistance to flame spread in accordance with BS 476 Part 7 test procedure.
  • Built-in vapour barrier prevents condensation.
  • Improved resistance against oil.
  • Reduced smoke development in the event of a fire.
  • Lightweight and flexible: quick and easy installation with low maintenance requirements resulting in time and cost savings.
  • Dust, fibre and CFC free with an ODP zero.

Application Areas: Thermal Insulation for pipework, vessels and ducts as well as solar panels.

  • Outdoors.
  • Hot gas lines.
  • Steam and dual temperature lines.

* for temperatures between -50C and -50C and ** for multi-layer applications above +125C, please consult our Technical Department.

Properties Values Remarks
Material Foamed EPDM Rubber
Max. Surface Temperature +150°C**              (+85°C for Tapes) ** For multi-layer applications above +125°C, please consult our Technical Department.
Min. Surface Temperature -50°C* * for temperatures between -50°C and -200°C, please consult our Technical Department.
Thermal Conductivity at 0° C 0.040 W/(m · K) Test according to BS 874 Part 2 1986
Thermal Conductivity at +40° C 0.045 W/(m · K)
Water Vapour Permeability Moisture Resistance Factor µ > 2,500 Test according to DIN 52 615
Water Absorption 0.2% by volume Test according to ASTM C 209
Surface Spread of Flames Class 1 Test according to BS 476 Part 7: 1997
Reaction to fire Self-extinguishing does not drip
Noise Reduction Sound Absorption Coefficient ISO 354:2003 - up to 0.8 Also suitable for use in the prevention of sound passage
Resistance to Building Materials: Very Good Ozone: Very Good UV: Very Good Chemicals: Consult Product Test List
Health Aspects Dust & Fibre Free
Environmental Aspects ODP zero GWP zero
Other Properties Meets UL 94 test requirements
Outdoor Applications NO additional coating or painting is necessary - HT/Armaflex is UV-resistant.

 

Armaflex Solar, Steam High-Temperature Pipe Insulation Tape HT-TAPE Lagging

More Information
Product NameArmaflex Solar Steam High Temperature Pipe Insulation Tape 15m x 50mm x 3mm HT-TAPE Lagging
SKUL145
mpnHT-TAPE
Brand c2cArmaflex
Short Description
  • Tape Length: 15 meters
  • Tape width: 50 mm
  • Tape Thickness: 3 mm
Description

Armaflex Solar Steam High-Temperature Pipe Insulation Tape 15m x 50mm x 3mm HT-TAPE Lagging

HT Armaflex High-Temperature Solar and Exterior Use Insulation.

HT/Armaflex is the insulation that meets the growing demand for a reliable and environmentally friendly flexible insulation material that can be used at higher temperatures.

Tape service temperature: Max +85 C 

The advantage of specifying HT/Armaflex.

  • Remains flexible at high temperatures of up to +150 C** and low temperatures down to -200 C*
  • UV-resistant and can be installed outside without additional protective measures.
  • Class 1 resistance to flame spread in accordance with BS 476 Part 7 test procedure.
  • Built-in vapour barrier prevents condensation.
  • Improved resistance against oil.
  • Reduced smoke development in the event of a fire.
  • Lightweight and flexible: quick and easy installation with low maintenance requirements resulting in time and cost savings.
  • Dust, fibre and CFC free with an ODP zero.

Application Areas: Thermal Insulation for pipework, vessels and ducts as well as solar panels.

  • Outdoors.
  • Hot gas lines.
  • Steam and dual temperature lines.

* for temperatures between -50C and -50C and ** for multi-layer applications above +125C, please consult our Technical Department.

Properties Values Remarks
Material Foamed EPDM Rubber
Max. Surface Temperature +150°C**              (+85°C for Tapes) ** For multi-layer applications above +125°C, please consult our Technical Department.
Min. Surface Temperature -50°C* * for temperatures between -50°C and -200°C, please consult our Technical Department.
Thermal Conductivity at 0° C 0.040 W/(m · K) Test according to BS 874 Part 2 1986
Thermal Conductivity at +40° C 0.045 W/(m · K)
Water Vapour Permeability Moisture Resistance Factor µ > 2,500 Test according to DIN 52 615
Water Absorption 0.2% by volume Test according to ASTM C 209
Surface Spread of Flames Class 1 Test according to BS 476 Part 7: 1997
Reaction to fire Self-extinguishing does not drip
Noise Reduction Sound Absorption Coefficient ISO 354:2003 - up to 0.8 Also suitable for use in the prevention of sound passage
Resistance to Building Materials: Very Good Ozone: Very Good UV: Very Good Chemicals: Consult Product Test List
Health Aspects Dust & Fibre Free
Environmental Aspects ODP zero GWP zero
Other Properties Meets UL 94 test requirements
Outdoor Applications NO additional coating or painting is necessary - HT/Armaflex is UV-resistant.

 

Armaflex Solar, Steam High-Temperature Pipe Insulation Tape HT-TAPE Lagging

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Trustpilot
Copyright © Pipelagging.com. All rights reserved 2023. Web Design & SEO by Smoking Chili Media