ArmaFlex Fastlink DN32 25m Single Pipe Coil – FL-AV-19X032E25S

ArmaFlex Fastlink DN32 25m Single Pipe Coil

ArmaFlex Fastlink DN32 25m Coil (FL-AV-19X032E25S) is the bulk-supply format of Armacell's pre-insulated flexible heat pump pipe system in DN32. Supplied as a single pipe coil, this 25m length is intended for installers who need longer runs or prefer to cut to length on site rather than using standard fixed-length sets.

Unlike the standard Fastlink sets, the 25m coil is not supplied with quick couplings. End fittings and couplings must be ordered separately from the Fastlink accessory range.

Key Features

• Single pipe — 25m coil for flexible on-site cutting and routing.
• Pre-insulated — factory-applied 19mm ArmaFlex flexible elastomeric foam insulation.
• Flexible corrugated stainless steel pipe (material 1.4404) — easier to route than rigid pipework.
• UV and weather resistant outer covering — suitable for exposed above-ground installations.
• Wide service temperature range — −50°C to +110°C.

Technical Specification

• Nominal size: DN32
• Configuration: Single pipe
• Coil length: 25m
• Pipe OD: approx. 40.6mm
• Pipe material: Corrugated austenitic stainless steel 1.4404
• Insulation: Flexible elastomeric foam (FEF)
• Insulation thickness: 19mm
• Service temperature: −50°C to +110°C
• Thermal conductivity: ≤0.038 W/(m·K) at 40°C
• Water vapour diffusion resistance: μ ≥ 4,000
• Reaction to fire: Euroclass E(L)
• Max operating pressure: 4 bar at 20°C
• UV resistance: Very good
• Colour: Grey

Important — Couplings Not Included

The 25m coil does not include quick couplings. You will need to order the appropriate Fastlink end fittings separately. For fixed-length double-pipe installations with couplings included, see the ArmaFlex Fastlink Standard Sets (DN25 & DN32).

Supply

This product is available to order — delivery on request. Lead times apply; please contact the Pipelagging technical team to confirm availability and delivery timescale before ordering.