Chat with us, powered by LiveChat

Aspen Universal Peristaltic Air Conditioning Condensate Water Pump FP2082/2

£135.17 £112.64
SKU
FP2082/2
  • Senses 5C differential across the evaporating coil
  • Requires 230V supply only
  • Only requires live/neutral supply and two sensors either side of the evaporating coil one air on and one air off
  • Self-priming lifts 3 metres (9.8ft), 12 metres discharge head (40ft)
  • Operates only on cooling
  • 3 minute timer overrun
  • Water flow rate: 6.25 ltrs (1.65 US gallons) per hr 12 metres (40ft) head
  • No siphoning back, No loud sound from dry running
  • Pump has a manual test switch
  • Pumps water, fibrously contaminated water and air
  • Fits into shallow ceiling void or unit
  • Pump rating: 0.2A, 230V AC Alternative voltages available
  • Maximum water temperature: 40C

Aspen Universal Peristaltic Air Conditioning Condensate Pump Fp2082

The Aspen Universal Peristaltic Condensate Pump Fp2082 operates with two temperature sensors. These allow the pump to detect and be triggered by a change in air temperature, making this pump suitable for many applications.

The Aspen Universal is designed to fit in ceiling voids and lift the condensate water from wall mounted machines where a gravity drain is too obtrusive. It can also be used on cassettes equipped with an internal lift pump. The pump can be installed remotely as it is self-priming to a height of 3 metres and will pump 6.25 litres of water per hour against a maximum head of 12 metres.
The Aspen Universal Pump regularly runs while the air conditioning system is cooling when the cooling switches off a 3-minute timer ensure that the condensate tray is emptied before the pump switches off.

The Aspen Universal pump is a peristaltic rotary type - which means that it is quiet in operation, very reliable and will run dry without fear of damage or rattling noise. Unlike other pumps using either mechanical or electrical conductivity sensors, the Universal does not suffer from corrosion or contamination problems.

Technical Details.

  • Senses 5C differential across the evaporating coil
  • Requires 230V supply only
  • Only requires live/neutral supply and two sensors either side of the evaporating coil one air on and one air off
  • Self-priming lifts 3 metres (9.8ft), 12 metres discharge head (40ft)
  • Operates only on cooling
  • 3-minute timer overrun
  • Water flow rate: 6.25 litres (1.65 US gallons) per hr 12 metres (40ft) head
  • No syphoning back, No loud sound from dry running
  • The pump has a manual test switch
  • Pumps water, fibrously contaminated water and air
  • Fits into shallow ceiling void or unit
  • Pump rating: 0.2A, 230V AC Alternative voltages available
  • Maximum water temperature: 40C
More Information
Product NameAspen Universal Peristaltic Air Conditioning Condensate Water Pump FP2082/2
SKUFP2082/2
mpnFP2082/2
Description

Aspen Universal Peristaltic Air Conditioning Condensate Pump Fp2082

The Aspen Universal Peristaltic Condensate Pump Fp2082 operates with two temperature sensors. These allow the pump to detect and be triggered by a change in air temperature, making this pump suitable for many applications.

The Aspen Universal is designed to fit in ceiling voids and lift the condensate water from wall mounted machines where a gravity drain is too obtrusive. It can also be used on cassettes equipped with an internal lift pump. The pump can be installed remotely as it is self-priming to a height of 3 metres and will pump 6.25 litres of water per hour against a maximum head of 12 metres.
The Aspen Universal Pump regularly runs while the air conditioning system is cooling when the cooling switches off a 3-minute timer ensure that the condensate tray is emptied before the pump switches off.

The Aspen Universal pump is a peristaltic rotary type - which means that it is quiet in operation, very reliable and will run dry without fear of damage or rattling noise. Unlike other pumps using either mechanical or electrical conductivity sensors, the Universal does not suffer from corrosion or contamination problems.

Technical Details.

  • Senses 5C differential across the evaporating coil
  • Requires 230V supply only
  • Only requires live/neutral supply and two sensors either side of the evaporating coil one air on and one air off
  • Self-priming lifts 3 metres (9.8ft), 12 metres discharge head (40ft)
  • Operates only on cooling
  • 3-minute timer overrun
  • Water flow rate: 6.25 litres (1.65 US gallons) per hr 12 metres (40ft) head
  • No syphoning back, No loud sound from dry running
  • The pump has a manual test switch
  • Pumps water, fibrously contaminated water and air
  • Fits into shallow ceiling void or unit
  • Pump rating: 0.2A, 230V AC Alternative voltages available
  • Maximum water temperature: 40C
Short Description
  • Senses 5C differential across the evaporating coil
  • Requires 230V supply only
  • Only requires live/neutral supply and two sensors either side of the evaporating coil one air on and one air off
  • Self-priming lifts 3 metres (9.8ft), 12 metres discharge head (40ft)
  • Operates only on cooling
  • 3 minute timer overrun
  • Water flow rate: 6.25 ltrs (1.65 US gallons) per hr 12 metres (40ft) head
  • No siphoning back, No loud sound from dry running
  • Pump has a manual test switch
  • Pumps water, fibrously contaminated water and air
  • Fits into shallow ceiling void or unit
  • Pump rating: 0.2A, 230V AC Alternative voltages available
  • Maximum water temperature: 40C
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Trustpilot
Copyright © Pipelagging.com. All rights reserved 2019.