Chat with us, powered by LiveChat

Aspen Mk4 Peristaltic Condensate Pump FP2080

£154.03 £128.36
SKU
FP2080
  • Operates on bead contact with water
  • Self-priming lifts 3 metres; 12 metres discharge head
  • Water flow rate: 6.25 litres per hour @ 12 metres head
  • Pump rating: 0.2A, 230V AC
  • Dimensions: 145mm(H) x 160mm(W) x 83mm(D)

Aspen MK4 Peristaltic Condensate Pump Fp2080

The Aspen MK4 Peristaltic Condensate Pump Fp2080 operates using water level sensors. This allows the pump to detect and be triggered by the level of water in the condensate tray. The detector has two sensors within the head which warm up to 15C above ambient. Simply connect MK4 peristaltic pump to a permanent mains supply, fit the sensor to the air conditioner drip tray and connect to the drip tray using the vinyl tube supplied.

The MK 4 Pump can be mounted remotely, as it is self-priming to a height of 3 metres (9.8ft), and will pump 6.25 litres (1.65 US gallons) of water per hour against a maximum head of 12 metres (40ft).  Unlike other pumps using either mechanical or electrical conductivity sensors, the MK4 does not suffer from corrosion or contamination problems. The water level detector has two sensors within the head which warm up to 15C above ambient. When the lower sensor comes into contact with water, the heat conductivity from the sensor provides a temperature difference setting the pump into motion. The pump will only turn off when the water level has reduced below the lower sensor and any moisture on the sensor has evaporated. The MK4 operates in dirty water.

Product Technical Specifications - Download PDF:

MK4

 
 
 
More Information
Product NameAspen Mk4 Peristaltic Condensate Pump FP2080
SKUFP2080
mpnFP2080
Description

Aspen MK4 Peristaltic Condensate Pump Fp2080

The Aspen MK4 Peristaltic Condensate Pump Fp2080 operates using water level sensors. This allows the pump to detect and be triggered by the level of water in the condensate tray. The detector has two sensors within the head which warm up to 15C above ambient. Simply connect MK4 peristaltic pump to a permanent mains supply, fit the sensor to the air conditioner drip tray and connect to the drip tray using the vinyl tube supplied.

The MK 4 Pump can be mounted remotely, as it is self-priming to a height of 3 metres (9.8ft), and will pump 6.25 litres (1.65 US gallons) of water per hour against a maximum head of 12 metres (40ft).  Unlike other pumps using either mechanical or electrical conductivity sensors, the MK4 does not suffer from corrosion or contamination problems. The water level detector has two sensors within the head which warm up to 15C above ambient. When the lower sensor comes into contact with water, the heat conductivity from the sensor provides a temperature difference setting the pump into motion. The pump will only turn off when the water level has reduced below the lower sensor and any moisture on the sensor has evaporated. The MK4 operates in dirty water.

Product Technical Specifications - Download PDF:

MK4

 
 
 
Short Description
  • Operates on bead contact with water
  • Self-priming lifts 3 metres; 12 metres discharge head
  • Water flow rate: 6.25 litres per hour @ 12 metres head
  • Pump rating: 0.2A, 230V AC
  • Dimensions: 145mm(H) x 160mm(W) x 83mm(D)
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
Trustpilot
Copyright © Pipelagging.com. All rights reserved 2019.