Snow and Ice Detector 6 amp in IP55 housing (suitable for DIN rail mounting)
[FX/CDM1A]

FLEXKIT ref. FX / CDM1A Electronic Hygrothermostat without housing.

Snow and Ice Detector 6 amp in IP55 housing (suitable for DIN rail mounting).

The FX/CDM1 A hygrothermostat permanently checks for the presence of snow or black ice in gutters or access ramps.
The heating cables are powered according to the outside temperature and the presence of humidity.
The energy required is calculated by an interval timer switch.

Electronic regulator alone: FX/CDM1 A
• Power supply: 230 V.
• Current rating: 6 A.
• Fits to DIN rail.
• Dimensions: 85 x 53 x 65 mm (3 modules).
External temperature sensor FX/CDM/SENSOR
• Type : CTN 1000 Ohms at 25C.
• Dimensions : Box 50 x 50 x 35 mm.
• Power supply : By standard 2 conductor cable, (not supplied)from the electronic box to the sensor terminals (50 m maximum).
External humidity sensor
• Capacitive type.
• Power supply: by 4 conductor cable from the electronic box to the sensor (5 m long, can be extended up to 50 m).
• Heating: When it freezes, the sensor is automatically heated to melt the snow on the electrodes.
• FX/CDM/SONDENEIGE: Box60 x 15 x 15 mm
+ 2 150 mm electrodes in the extension.
• FX/CDM/SONDEPARKING
dimensions 60 x 60 x 35 mm.
FX/BOITIER option
• IP 54 box (195 x 115 x 110 mm) for hygrothermostat.

Includes:
FLEXKIT ref. FX / CDM / SONDE
Temperature sensor for FX/CDM1A.
FLEXKIT ref. FX / CDM / SONDENEIGE
Humidity sensor for Gutters

This device will turn on the power when the temperature AND the humidity match the settings of ice/snow risks.