Rockwool 30mm Thick 1 Metre Pipe Lagging Insulation Sections

Rockwool Rocklap 1m Foil Backed Pipe Insulation Lagging Sections

RockLap H&V Pipe Sections are strong lengths of pre-formed insulation with a onepiece, factory applied foil facing with integral self-adhesive lap. The integral lap ensures fast and easy installation: just snap the Sections onto the pipe, peel off the backing tape and smooth down for a completely sealed joint. The Sections are designed for thermal and acoustic insulation of heating, ventilation and air-conditioning pipework operating in the temperature range 0 degrees C to 700 degrees C.

For rapid, efficient pipework insulation

Advantages

• Resilient, high performance barrier provided by one-piece, reinforced foil with integral lap
• Fast and simple installation reduces costs and time on site
• Installation may be carried out in winter conditions
• Tape requirement reduced
• Class O finish

Rockwool Rocklap 1m Foil Backed Pipe Insulation Lagging Sections.

Rock Wool RockLapV Pipe Sections are strong lengths of pre-formed insulation with a one piece, factory applied foil facing with integral self-adhesive lap. The integral lap ensures fast and easy installation: just snap the Sections onto the pipe, peel off the backing tape and smooth down for a completely sealed joint. The Sections are designed for thermal and acoustic insulation of heating, ventilation and air-conditioning pipework operating in the temperature range 0 degrees C to 700 degrees C. For rapid, efficient pipework insulation Advantages

* Resilient, high performance barrier provided by one-piece, reinforced foil with integral lap

* Fast and simple installation reduces costs and time on site

* Installation may be carried out in winter conditions

* Tape requirement reduced

* Class O finish.

Description

Facing
RockLap H&V Sections are provided with a factory applied foil facing which meets the requirements of Class O with joints sealed using a suitable foil tape.
Self-adhesive lap
The self-adhesive lap bonds effectively at low site temperatures, hence reducing possible delay during winter installation. The adhesive on the lap has been specially formulated to provide an aggressive bond with a long life and high shear properties.
Density
The nominal density is not less than 120 kg/m3.

Fire Performance
RockLap Pipe Sections are non-combustible and are rated Class O as defined within the Building Regulations.