Kingspan Kooltherm Zero ODP Foil Faced Pipe Insulation 25mm wall 93mm bore 1m
[K25X93]

Kooltherm Phenolic Zero ODP Foil Faced Pipe Insulation 25mm wall 93mm bore

The Kooltherm range of CFC/HCFC-free insulation materials comprises Kooltherm rigid phenolic insulation and Kooltherm High-Density rigid phenolic insulation. They are used in the manufacture of Kooltherm Pipe Insulation and Kooltherm Insulated Pipe Support Inserts. Together all these products make up the Kooltherm Pipe Insulation System which is predominantly designed for pipework in building services and HVAC applications. Kooltherm rigid phenolic insulation has a far superior resistance to burning and spread of flame, and the lowest thermal conductivity of any commonly available insulant at 0.021 W/m·K (0.145 Btu·in/h·ft F). A low thermal conductivity allows specified thermal performance standards to be easily achieved with a minimal thickness of insulation. For more information including technical data, on Kooltherm rigid phenolic insulation and Kooltherm High-Density rigid phenolic insulation please contact us.

Temperature Range

Kooltherm rigid phenolic insulation and Kooltherm High–Density rigid phenolic insulation may be used for pipework and equipment operating within the temperature range –180C to +120C / –292F to +248F.

Thermal Performance

Kooltherm rigid phenolic insulation has a thermal conductivity of 0.021 W/m·K / 0.146 Btu·in/hr·ft2·F. This is the lowest thermal conductivity of any commonly available insulation material.
A low thermal conductivity allows specified thermal performance standards to be achieved with a minimal thickness of insulation. This is particularly significant where space saving is important.
A thinner insulant can facilitate installation in confined spaces. Furthermore, it can often result in a lower surface area and
therefore savings in finishing materials.

Kooltherm rigid phenolic insulation is based on patented technology. Whilst retaining all the benefits of rigid polyurethane and rigid polyisocyanurate insulation Kooltherm rigid phenolic insulation has a far superior resistance to burning and spread of flame, and the lowest thermal conductivity of any commonly available insulant at 0.021 W/m·K / 0.145 Btu·in/hr·ft2 F.
Kooltherm High–Density rigid phenolic insulation is used in the manufacture of insulated pipe support inserts. Its greater density gives it much higher compressive strength and rigidity whilst retaining its far superior resistance to burning and spread of flame, making it an ideal insulation material for load
bearing applications.
Kooltherm rigid phenolic insulation and Kooltherm High–Density rigid phenolic insulation are entirely CFC/HCFC–free with zero Ozone Depletion Potential (ODP).
They have been developed to provide optimum performance with regards to insulation efficiency, fire resistance, low smoke emission, compressive strength, environment, health, safety
and cost.
Kooltherm rigid phenolic insulation and Kooltherm High–Density rigid phenolic insulation have gained a reputation for quality and consistency, a reputation that has spread worldwide.