Frost Protection Thermostat For Heater Tape System FX/AT
[FX/AT]

Frost Protection Air Thermostat For Heater Tape System

In order to maintain the right temperature, a control device will provide the following advantages:
• the heating element is energised only when necessary.
• the heating element lifetime is increased.
• the heating element will not overheat.
• the energy consumed is kept to a minimum.

FX/AT ambient thermostat
To protect vessels and piping from freezing, this thermostat can be set from - 5 Degrees C to + 40 Degrees C.

16 A rated. IP65 Housing. Two Glands 20mm.

To be used for a maximum circuit length of 130m.