Armaflex Adhesive Cleaner 1.0 Litre
[L418]

Armaflex Adhesive Glue Cleaner 1.0 Litre

Armaflex cleaner is a clear, colourless volatile liquid. It is used for the removal of grease oils and dirt from surfaces prior to the use of Armaflex adhesives or Armafinish FR paint.
The cleaner may also be used to clean brushes, tools, etc. which have become contaminated with Armaflex adhesive.

Safety Data Sheet

Solvent type Methyl Ethyl Ketone, aliphatic hydrocarbons and Toluene.

Application temperature -10C to +35C (ideal +20C). DO NOT apply to heated surfaces.

Fire performance Dry Not applicable.
Wet Flammable flash point < 21C.

Storage Store in a properly constructed fire-resisting cabinet or structure. Avoid extreme heat.

Shelf life May be kept indefinitely in a sealed container.

Metal surfaces Before installing Armaflex sheet on to ductwork the surface shall be thoroughly cleaned and degreased using Armaflex cleaner. The cleaner is applied using clean lint-free rags and the metal surface allowed to dry completely before the application of adhesive.

Armaflex surfaces Where adhesive is being used on the smooth surface of Armaflex, e.g. in the insulation of valves and other fittings, it is recommended that the adhesive areas are cleaned prior to application and allowed to dry thoroughly.

Cleaning tools and equipment Brushes which have become hardened with adhesive may be recovered by soaking until soft.

Special hints Keep the container tightly closed when not in use.
This cleaner should not be added to Armaflex adhesive or to Armafinish FR paint.