35mm Pipe Insulation Hot Cold Water 25mm Wall Slit TL-35/25-DG-1M
[L491-1]

TL-35/25-DG-1M

Tubolit is a high quality CFC and HCFC free silver grey flexible closed cell polyethylene pipe insulation. Particularly effective for the thermal insulation of domestic heating and plumbing pipe work for energy conservation and frost protection. Tubolit, being flexible, is easy to install. It is not fibrous and creates no dust during installation or use.
Tubolit with all other Armacell insulation products are CFC and HCFC free, each with an ODP of zero and manufactured to quality standard BS EN ISO 9001:2000 and environmental standard BS EN ISO 14001:1996.

Technical Product Data - Tubolit

Properties	Values	Remarks
Material	Flexible, closed cell polyethylene
Max. Surface Temperature	+100° C
Min. Surface Temperature	+5° C	For temperatures below +5° C, please consult our Technical Department.
Thermal Conductivity at 0° C	0.035 W/(m · K)	Test acc. to EN ISO 8497
Thermal Conductivity at +40° C	0.039 W/(m · K)
Ignition Resistance	No Ignition
Noise Reduction	Sound Absorption Coefficient ISO 354:2003 - up to 0.8	Also suitable for use in the prevention of sound passage
Resistance to	Ozone: Good Oil and Grease: Good
Density	25 kg/m3
Dimensional Stability	2%
Health Aspects	Dust & Fibre Free
Other Properties	ODP zero GWP three

Tubolit is supplied in slit or semi-slit tubes dependant on thickness which can be easily snapped on or sleeved over the pipe work in the conventional manner. The tubes should always be fitted with a slight degree of endways compression. All joining faces at elbows,T’s and butt joints should be fixed using Armaflex 520 adhesive. Longitudinal seams may be joined using Easifix clips.