15mm Pipe Lagging x 2m Slit Tubolit TL-15/19-DG 19mm Wall
[L483]

Tubolit TL-15/19-DG

Tubolit is a high quality CFC and HCFC free silver grey flexible closed cell polyethylene pipe insulation. Particularly effective for the thermal insulation of domestic heating and plumbing pipe work for energy conservation and frost protection. Tubolit, being flexible, is easy to install. It is not fibrous and creates no dust during installation or use.
Tubolit with all other Armacell insulation products are CFC and HCFC free, each with an ODP of zero and manufactured to quality standard BS EN ISO 9001:2000 and environmental standard BS EN ISO 14001:1996.

Technical Product Data - Tubolit

Properties Values Remarks Material Flexible, closed cell polyethylene Max. Surface Temperature +100° C Min. Surface Temperature +5° C For temperatures below +5° C, please consult our Technical Department. Thermal Conductivity at 0° C 0.035 W/(m · K) Test acc. to EN ISO 8497 Thermal Conductivity at +40° C 0.039 W/(m · K) Ignition Resistance No Ignition Noise Reduction Sound Absorption Coefficient ISO 354:2003 - up to 0.8 Also suitable for use in the prevention of sound passage Resistance to Ozone: Good Oil and Grease: Good Density 25 kg/m3 Dimensional Stability 2% Health Aspects Dust & Fibre Free Other Properties ODP zero GWP three Tubolit is supplied in slit or semi-slit tubes dependant on thickness which can be easily snapped on or sleeved over the pipe work in the conventional manner. The tubes should always be fitted with a slight degree of endways compression. All joining faces at elbows,T’s and butt joints should be fixed using Armaflex 520 adhesive. Longitudinal seams may be joined using Easifix clips.